Chrysler 2008 Aspen Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 479

Chrysler 2008 Aspen Скачать руководство пользователя страница 127

off. Both of the indicators on identifies High heat level.
The lower indicator on only identifies Low heat level.

NOTE:

The HI heat setting will operate for approxi-

mately 30 minutes. After 30 minutes, the system will
automatically transition to the low heat setting. The LO
heat setting will operate for 30 minutes, then the system
will turn off.

If the low heat setting is initially selected, the system will
operate for 30 minutes and then turn off.

If the indicator light on the heated seat switch does not
light, an indicator blinks when the switch is depressed or
if the heated seats do not operate, the system should be
serviced by a qualified technician.

WARNING!

Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes,
spinal cord injury, medication, alcohol use, exhaus-
tion or other physical condition must exercise care
when using the seat heater. It may cause burns even
at low temperatures, especially if used for long
periods of time.

Do not place anything on the seat that insulates
against heat, such as a blanket or cushion. This may
cause the seat heater to overheat.

126

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
125
126
127
128
129
...
»

Содержание 2008 Aspen
































































































































































































































































































































































































































































































Отзывы:

Нет отзывов