Chrysler 2007 300 Скачать руководство пользователя страница 24

Страница: 24 / 432

chime will sound if the key is in the LOCK or ACC
position and a door is open, as a reminder to remove the
key.

Automatic Door Locks
The doors will lock automatically on vehicles with power
door locks if all of the following conditions are met:

1. The Automatic Door Locks feature is enabled.

2. The transmission is in gear.

3. All doors are closed.

4. The throttle is pressed.

5. The vehicle speed is above 15 mph (24 km/h).

6. The doors were not previously locked using the power
door lock switch or remote keyless entry transmitter.

Automatic Door Locks Programming
The Automatic Door Locks feature can be enabled or
disabled as follows:

•

For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to “Personal Settings

(Customer Programmable Features)” under “Elec-
tronic Vehicle Information Center (EVIC)” in Section 4
of this manual for details.

•

For vehicles not equipped with the EVIC, performing
the following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON and
then back to LOCK 4 times ending up in the LOCK
position.

3. Depress the power door lock switch to lock the doors.

4. A single chime will indicate the completion of the
programming.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

Use the Automatic Door Locks feature in accor-

dance with local laws.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2007 300

















































































































































































































































































































































































































































Результаты поиска

Содержание 2007 300

Отзывы:

Бренды по названию

Популярные бренды

Chrysler 2007 300, Руководство пользователя

Результаты поиска

Содержание 2007 300

Отзывы:

Бренды по названию

Популярные бренды