Chrysler 200 Convertible Скачать руководство пользователя страница 33

Страница: 33 / 505

6. The vehicle speed is 0 mph (0 km/h).

Auto Unlock Door On Exit Programming

The Automatic Unlock Doors On Exit feature can be
enabled or disabled as follows:

•

For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to “Electronic Vehicle
Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-
ing Your Instrument Panel” for further information.

•

For vehicles not equipped with the EVIC, perform the
following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON/
RUN and then back to LOCK four times ending up in the
LOCK position.

3. Press the power door UNLOCK switch to unlock the
doors.

4. A single chime will indicate the completion of the
programming.

NOTE:

This feature will not be functional until the

vehicle has been driven and the shift lever returned to the
PARK position.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 200 Convertible


























































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 Convertible

Отзывы:

Chrysler 200 Convertible, Руководство пользователя, Страница: 33 / 505

Результаты поиска

Содержание 200 Convertible

Отзывы: