Chronos Manufactures Mathis Montabon MM-26, Инструкция по эксплуатации / Международная гарантия

Страница: 9 / 36

Instruction Manual
EN
SETTING THE DATE, MONTH AND DAY OF THE WEEK
Pull the crown carefully out to position 2 (two clicks) and set the hands outside the zone mentioned before, e.g.
at 6:00. Push the crown back to position 1 (one click position) and turn it counterclockwise to the date required.
Press the adjustment pusher A until the right month is displayed. Press the adjustment pusher B until the right
day is displayed. The date/month must be set manually at the end of the month.
SETTING THE TIME
Pull the crown carefully out to position 2. Turn the crown in either direction to set the hands on the time required.
The indicator in the middle (1 – 24) is the 24 hour display. When finished push the crown carefully back in to place
and bolt it by turning it clockwise.
MM-26: Aerotime
Model number: MM-26
Mouvement: Automatic
Calibre: M-26
20 jewels
USE
When setting the watch for the first time, unscrew the crown by tur-
ning it counter-clockwise. Winding: Winding is done by turning the
crown clockwise (40-50 times). The watch will then automatically
wind up when you wear it.
Attention: So as not to damage the mouvement of the watch, do
not set the date/month/day while the hands are between 8 am
and 4pm (16:00) or between 8pm (20:00) and 4 am. Please press
the button on your watch slowly and carefully to avoid damaging
the mechanism. When the warranty of your watch expires, we re-
commend you to send it in for a revision to ensure its longevity.
A revision should optimally be conducted once a year to coun-
teract general wearout and to maintain the water-resistance of
your watch.