Chronos Manufactures Andre Belfort AB-7210, Инструкция по эксплуатации

Страница: 9 / 43

Unscrew the crown by turning it counter-clockwise. Wind up the watch
by turning the crown between 30 and 40 times. Pull the crown carefully
to position 2 and set the watch to 7 o’clock. Now you may set the month
by pushing button A . By pushing button B you can set the year display.
Push the crown to position 1 . Set the desired date by turning the crown
clockwise. Set the desired day by turning the crown counter-clockwise.
Pull the crown carefully to position 2 again and set the current time.
When finished push the crown back in and bolt it by turning it clockwise.
The month/year display must be set manually at the end of the month/
year.
Important: Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Plea-
se press the button on your watch slowly and carefully to avoid
damaging the mechanism. When the warranty of your watch ex-
pires, we recommend you to send it in for a revision to ensure its
longevity. A revision should optimally be conducted once a year to
counteract general wearout and to maintain the water-resistance
of your watch.
EN