3
HSK-PC Power Connection
For use with SRF Heating Cables
1. Score the cable outer jacket 3-1/2” from the cable
end. Remove the jacket to expose the braid.
3. Using standard electrical cutters, cut a 3/4” long
notch out of the cable, between the two conduc-
tor wires. Bare a 3/8” length of each con-ductor
by stripping off the outside insulation and the inner
black core material.
2. Pick the braid apart near the outer jacket and pull
the cable through the opening in the braid. Twist the
braid into a pigtail.
4. Slide one end of each of the two insulated barrel
connectors over the bare portion of the conductors.
Crimp the barrel connectors on using a crimping
tool.
3-1/2”
Score Jacket and remove to
expose braid.
3/4”
• Cut 3/4” notch between conductors.
• Bare 3/8” of each conductor.
• Pick braid apart and pull
cable through.
• Twist braid into pigtail.
• Slide insulated barrel connectors
(2) over bared conductors.
• Crimp.
5. Slide a 3” length of heat shrink tubing over and past
the barrel connectors.
• Slide 3” length of heat shrink tube
over and past connectors.
