Color Block PSU-30 User Manual
5
V1.2 December 2006
2.2
Control
The Color Block PSU-30 menu items are accessed via the LCD display and the following
controls:
•
Right hand button (red) = Enter (hold for 2 seconds to save)
•
Left hand button (blue) = Exit without saving
•
Wheel = Adjusts values or scrolls through menu items
The LCD screen shown to the right is currently at the
Home
position. The
Home
position displays; product name, current
DMX Address, current Control Mode and Time.
If left unadjusted at a main menu position for 5 seconds the
LCD screen will revert to the
Home
position.
The software version number is displayed on power-up.
a. Control menu
Use the wheel to scroll through the control menu positions:
Home / DMX Address
To set the DMX start address of the PSU-30, press Enter, turn wheel to adjust DMX
start address, press Enter for 2 seconds to save.
Control Mode
The PSU-30 can be set to operate in various DMX controlled modes. We offer 3
grouping options (individual, block, all) with 3 control options on each (FX, HSI and
RGB) see below for details. Press Enter, turn wheel to select control mode, press
Enter for 2 seconds to save.
Mode 1 (367ch) - Individually grouped, 120 x HSI + FX
Mode 2 (360ch) - Individually grouped, 120 x HSI
Mode 3 (360ch) - Individually grouped, 120 x RGB
Mode 4 (96ch) - Block grouped, 30 x HSI + FX
Mode 5 (90ch) - Block grouped, 30 x HSI
Mode 6 (90ch) - Block grouped, 30 x RGB
Mode 7 (9ch) - All grouped, 1 x HSI + FX
Mode 8 (3ch) - All grouped, 1 x HSI
Mode 9 (3ch) - All grouped, 1 x RGB
When DMX is Lost
If DMX is not detected various output options can be selected: Press Enter, turn
wheel to selection, press Enter for 2 seconds to save.
Off - will snap to off
Hold - will hold last valid DMX state
Trig - will default to
Time Trigger
operation
Look 1-42 - will snap to the
Look
of your choice
Look Store
The PSU-30 has 42 internal FX Looks for standalone operation, 1-9 are preset. To
replay a Look, press Enter and scroll through the Looks.
Note:
DMX has priority over internal Looks.
Looks can be recorded to the internal flash memory by users and will be preserved
on power down. However, looks will be returned to default setting if menu 8 Reset is
performed. There are two ways to record a look:
Simple, with DMX console.
Set the PSU-30 to Control Mode 1. Use a DMX console to adjust the internal FX
