Chroma 69200-1, Руководство пользователя

Страница: 72 / 86

Charge/Discharge Controller 69200-1 User’s Manual
4-2
Figure 4-2
4.2.2 Setting Network Parameter (IP, Subnet Mask,
Gateway)
In general, the PC has no DHCP Server; therefore, this section explains the operation under
Private LAN only. All network devices connected require to the IP manually. For example,
if the PC uses crossover cable to connect 69200-x, then the IP address of these two devices
has to set manually. Since the IP of 69200-x is set to 192.168.1.100, the connecting devices
need to set to 192.168.1.x, where x=1~255 (exclude 100).
Setting Procedure for PC when DHCP = OFF
Check if the PC of user’s for local area network IP setting is set to do manually. If not,
change it to manual setting and finish the rest settings.