Chroma 69200-1, Руководство пользователя

Страница: 23 / 86

Installation
2-3
2. To maintain the device in its best operating mode, be sure to keep
the external input/output cables and communication cables smoothly
without bundled or twisted.
2.5 Assembling the Racket Kit & Handle
First remove the silver bar on the side of plastic frame and then use a M4X15 flat screw to fix
the racket kit to it. To install the handle, use a M4X9 flat screw to secure the handle on the
racket it. Figure 2-3 shows the way of assembly.
Figure 2-3
2.6 Power on Procedure
All of the grounding terminals, extension cords and devices that
connected to the controller need to be grounded to earth properly before
powering on. Any disabled grounding protection may cause potential
hazard to personal injury.
Connect the power cord and press down the power switch on the front panel. It is powered
on when the fan starts running.
2.7 Maintenance & Cleaning
Remove all connected wires and cables on the controller before cleaning. Use a brush to
clean the dust on 69206-60-8 surface and if there are stains on the chassis that cannot be
removed by brush, wipe it with a volatile liquid. Do not use any corrosive liquid to avoid
damaging the chassis. Use a damp cloth with soap and water or a soft detergent to clean the
LCD front panel. Please send it back to the distributors or agents of Chroma for internal
cleaning. Do not open the chassis cover arbitrarily
CAUTION