Chroma 63200A Series, Инструкция по эксплуатации и программированию

Страница: 34 / 141

Operation Overview
3-3
HOTKEY 3.2.2
Changing the HOTKEY
Press the HOTKEY for 2~3 seconds to switch the HOTKEY to the current loading mode and
the HOTKEY display will change as well.
It can set the frequently used mode as a HOTKEY to facilitate operation.
Function Keys 3.2.3
Table 3-2 Function Keys Description
Name Description
A/B It switches the load to A and B two types. A yellow indicator is located on
the left of the function key.
RANGE It switches the loading mode range through the cycle of H/M/L.
MODE The menu for basic loading modes.
EXTEND It is used when working with extended load. A green indicator is located on
the left of the function key.
CONFIG/
LOCAL It configures the function by setting up the parameters. It can also return to
local control when in remote mode.
EDIT The parameter editing function.
SHORT It simulates the short circuit function. A red indicator is located on the left
of the function key.
ADVA The menu for advanced functions.
EXIT It returns to the setup in previous level and exits the parameter input status.
SHIFT It can execute the SHIFT composite function keys. A blue indicator is
located on the left of the function key.
LOAD The loading and unloading function key. The key has a blue indicator
located on the right.
To enable the SHIFT composite function, press SHIFT first and the mapping function key.
Table 3-3 SHIFT Composite Function Keys
Name Description
LOCK It locks and unlocks the function. Any input is prohibited when lock is
enabled.