Christopher Ward C8 UTC Worldtimer, Руководство пользователя

Страница: 8 / 18

7
How to operate your C8 UTC Worldtimer
The crown should sit flush to the case (position
1
)
in order to maintain water resistance.
• To re-power the watch after a period of non-use,
simply wind the crown in a clockwise direction.
Your C8 UTC Worldtimer has a maximum power
reserve of 42 hours when fully wound. Normal
wearing will allow the rotor to start re-powering
the watch over time after putting it on your wrist
• Pull gently into position
2
. For rapid date
correction, turn in an anti-clockwise direction.
To set the 24-hour UTC hand, turn in a
clockwise direction.
• To set the time pull out the crown gently into
position
3
. This position is used for handsetting
and stopping of the second hand. Turn the crown
until you reach the correct time e.g. 10.08 hr.
For precise time setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
PLEASE NOTE: Date correction should not
be carried out between 20.00 hr and 02.00 hr
as the watch gearing will already be aligning
itself to change the date.