6
How to operate your C60 Anthropocene GMT
6
For a superior water resistance your crown is of the screw-down
type. The crown should sit flush to the case (position
1
) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2
for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Anthropocene GMT has a maximum power
reserve of up to 56 hours when fully wound. Normal wearing will
allow the rotor to start re-powering the watch over time after
putting on your wrist.
• Pull gently into position
3
. For rapid date correction, turn in an
anti-clockwise direction. To set the GMT hand, turn the crown
clockwise and rotate the hand until you have reached the desired
time indication. The GMT hand moves in one-hour increments.
• Pull gently into position
4
. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time, date and GMT hand
Содержание C60 Anthropocene GMT
Страница 2: ...2 2 2 2...
