Christini AWD, Руководство по обслуживанию

Страница: 9 / 25

Service Manual
Page 9
Fork Driveshaft Maintenance
Installation:
▪
Insert the drive shaft into the steering tube, sprocket first,
until the miter gear is fully seated on its sealed bearing
support.
▪
Loop the chain around the shaft sprocket and the floating
cog. Press the cog into the bearing.
▪
Press the upper hex portion of the driveshaft into the cog
and slide the chain crown up into place.
▪
Use removable threadlocker when re-installing the crown
cover screws.
▪
Use removable threadlocker on the pinion bolt.
Removal:
▪
Slide the two sections of the front drive shaft together.
▪
The chain crown cover can slide off at this point.
▪
The pinion gear can also be removed at this point.
▪
Remove the floating cog and power transfer chain from
the internal section of the chain crown.
▪
Use your thumbs to press the center sprocket up through
the lower steering tube.
▪
Carefully pull the drive shaft out of the steering tube.