Christini AWD KTM, Руководство по обслуживанию

Страница: 28 / 92

Page 27
•
Remove cover bearing with bearing removal punch. Note o-ring lip
near inner race of bearing is easily damaged. Only apply pressure
to inner race of bearing.
•
Remove drive insert from gear with hammer and bearing removal
tool.
•
Before reassembly of dropouts, all parts must be cleaned and
inspected individually for damage or wear. Parts can be cleaned
with solution no different then OEM fork. Be sure to blow dry
dropouts and parts prior to reassembly if cleaning solution is used.
•
Pinion and bevel gear must be replaced as a set.
•
If bearings are seized or hard to turn by hand they must be
replaced or cleaned and repacked with grease.
•
Be sure to grease all o-rings and gears during reassembly.
Dropout Disassembly