Christie Vive Audio LS1S Скачать руководство пользователя страница 5

Safety and warning guidelines

Read all safety and warning guidelines before installing, operating, or maintaining the speakers.

Installation safety

The following guidelines apply when installing the speakers.

Warning! Failure to comply with the following could result in death or serious injury.

Before installation, inspect all components for cracks, deformations, corrosion, and missing or
damaged parts that could reduce their installation strength.

A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.

The supporting structure must safely support the combined load of the product, all attached
hardware, and components following all local safety standards and regulations.

Always install all legally required safety straps or cables.

Observe load ratings and applicable local safety codes.

FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.

Caution! Failure to comply with the following could result in minor or moderate injury.

FIRE HAZARD! Do not install near any devices that produce heat such as amplifiers, radiators,
heat registers, or stoves.

Christie products must be installed and serviced by Christie qualified technicians.

Notice. Failure to comply with the following may result in property damage.

Always turn off and disconnect the amplifiers from power before making audio connections or
servicing a speaker.

Operation safety

The following guidelines apply when operating the speakers.

Caution! Failure to comply with the following could result in minor or moderate injury.

To prevent permanent hearing loss, ear protection (ear plugs, canal protectors, or ear muffs)
must be worn when operating the amplification system.

Do not expose the product to moisture.

Do not place objects containing liquids on the product.

Notice. Failure to comply with the following may result in property damage.

Speakers exposed to extremely low temperatures must be allowed to warm for a minimum of
one hour before playing them at typical application levels.

Introduction

Christie Vive Audio LS1S/LS2S/LS4S/LS5S Line Source Surround Speakers User Manual

5

020-102172-01 Rev. 1 (06-2016)

Copyright 

©

 2016 Christie Digital Systems USA Inc. All rights reserved.

Содержание Vive Audio LS1S




















Отзывы: