Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL5132
Aug 02-NA
Brightness
•
3000 ANSI lumens
•
90% brightness uniformity across
the screen
Contrast Ratio (1.5-2.2:1 zoom lens)
•
300:1 ANSI, 800:1 full field
Resolution/Digital Processing
•
3-chip 0.9" DMD™‚ (Digital
Micromirror Device) system
•
True SXGA 1280 x 1024 chip resolution
•
13-bit user selectable gamma table
•
More than 1 billion displayable colors
Dynamic Scaling
•
Resizing capabilities to scale down
from 1600 x 1200 and up from
640 x 480 to SXGA resolution
•
Independent horizontal and vertical
scaling adjustment for graphics
and video inputs
Horizontal Frequency Range
•
15 to 120kHz
Vertical Frequency Range
•
24 to 120Hz
Field Interchangeable Optional Lenses
•
Fixed short throw lens: 1.2:1
•
Zoom lenses: 1.5-2.2:1, 2.2-4:1,
and 4-7:1
•
Up to 130% of vertical lens offset for
off-axis projection
•
Up to 80% of horizontal lens offset
•
Compatibility with VistaGraphX lenses:
0.8:1, 2.5-4:1, 4-7:1 (adapter required)
•
Screen size: 1.8m - 12.2m
(6ft - 40ft) diagonal
Lens Mount
•
Manual horizontal and vertical lens
offset, focus and zoom adjustments
•
"Bayonet-style" lens insertion system
•
Lens mount tilt adjustment
•
Built-in light shutter
Inputs
•
Built-in RGB/YUV/YPbPr inputs allowing
separate H and V syncs, composite
sync and sync-on green/luma
(5 BNC connectors)
•
Multi-standard Video Decoder Module
(NTSC 3.58, NTSC 4.43, PAL, PAL 60,
PAL M, PAL N, SECAM) with one
composite video input (BNC and RCA
connectors) and one S-video input (two
BNC and 4-pin mini-DIN connectors)
•
Built-in Audio Control Module with
4 stereo audio inputs and 1 stereo
output (RCA connectors)
•
Slot for an optional input module
•
Full compatibility with third party
switchers
HDTV/DTV Compatibility
•
Full HDTV/DTV compatibility on
analog RGB/YPbPr inputs
•
Accepts 480i, 480p, 576i, 576p, 720p,
1035i, and 1080i formats at all
applicable frame/field rates
•
Accepts 1080p at 24, 25 and 30Hz
frame rates
•
Optional HDTV Serial Digital
Input Module
Various Keypads
•
Standard hand-held IR backlit remote
keypad, front and rear infrared sensors
•
Built-in backlit keypad
•
Optional RS422 two-way remote
controller with LCD display using 6-pin
XLR connector with range of
600ft (183m)
•
Optional wired backlit remote keypad
with 3-pin XLR connector
Control/Networking
•
Third party control system and
switcher compatibility
•
Dual RS232 ports for computer
control, with loop-through for
connection of multiple projectors
•
Dual 6-pin XLR RS422 ports for
connection of optional LCD two-way
controllers and loop-through to multiple
projectors up to 600ft (183m)
Diagnostics
•
Built-in LCD diagnostic display indicates
operational status and error messages
•
Power and status LED
•
Full diagnostics through RS232
9-pin D connector
Graphical User Interface
•
Auto set-up feature
•
"Direct Access" intuitive user interface
for complete projector control in
5 world languages
•
On-screen user movable menus to fit
different image aspect ratios
(4:3, 5:4, 16:9, etc.)
•
On-screen help menus
•
100 channel memories
•
Auto power feature
Lamp Specification/Color
Temperature
•
700W Xenon CERMAX
®
illumination system
•
Pre-aligned lamp module
•
Constant color temperature over the
lamp life
•
Color temperature adjustment range:
32000K to 93000K
•
User replaceable lamp within 5 minutes
•
Typical lifetime: 1000 hours
Variable Lamp Power Supply/Light
Output Control (LiteLOC™)
•
"Auto Brightness" mode to maintain
constant brightness over time
•
"Lamp Conserve" mode to extend the
lamp life
•
"Max Brightness" mode for maximum
light output
Power Requirements
•
Line voltage: 100 VAC to 240 VAC
+/- 10% @ 50/60Hz
•
Power consumption: 1150W maximum
•
Thermal dissipation: 3950BTU/hr
•
Operating current: 11.5A maximum
(at 100 VAC)
Weight and Size
•
88 lbs (39.9 kg)
•
22.28" W x 30.1" L x 11.88" H
(56.6cm W x 76.5cm L x 30.2cm H)
Standard Accessories
•
IR remote keypad with batteries
•
User manual with warranty card
•
2.44m (8ft) line cord
Optional Accessories
•
Serial Digital Input (SMPTE 259M/CCIR
601) with loop-through feature
•
Digital HDTV Input module (with loop-
through feature) compatible with
all known HDTV formats
•
DVI/DFP Input module
•
10-bit ADP (Advanced Digital
Processing) module
•
Wired remote keypad
•
Motorized lens mount upgrade
•
RS422 two-way remote LCD controller
•
Replacement lamp module
•
Remote infrared sensor
•
Service manual
•
Librarian communication software
•
Transit case
Regulatory Approvals
•
CSA, UL and European safety approvals
•
North American and European
EMI/EMC approvals
Warranty
•
One year parts and labor
•
Accessories: one year
Vista S3
•
Specifications
•
The S3 offers the ability to input pixel
formats with independent horizontal
and vertical scaling control.
•
The S3 offers an inexpensive brightness
upgrade path.
•
"Bayonet-style" lens insertion system
and lens mount tilt adjustment.
F E AT U R E S
Due to constant research,
specifications are subject to
change without notice
.
WWW.CHRISTIEDIGITAL.COM
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]
