Christie UHD982-P, Руководство по обслуживанию

Страница: 11 / 16

1 1
Access Series LCD UHD982-P Panels Service Guide
020-001709-01 Rev. 1 ( 01 - 20 20 )
Copyright © 20 20 Christie Digital Systems USA, Inc. All rights reserved.
Replacement procedures
1. Remove the right rear cover (on page 6).
2. Mark and remove all connectors.
3. Using a Phillips #1 screwdriver, remove the six screws securing the main AD board to the display panel.
4. Replace the main AD board.
5. To install the replacement part, follow these steps in reverse order.
Replacing the joystick
The joystick navigates through on-screen display menus without the remote control.
1. Remove the full rear cover (on page 7).
2. Mark and remove all connectors.
3. Using a Phillips #1 screwdriver, remove the two screws securing the joystick board to the rear cover.
4. Replace the joystick board.
5. To install the replacement part, follow these steps in reverse order.
Replacing the OPS board
The OPS board sends the content on the OPS module to the main AD board.
1. Remove the right rear cover (on page 6).
2. Mark and remove all connectors.
3. Remove the four screws and the cover over the OPS board.
4. Using a Phillips #1 screwdriver, remove the four screws securing the OPS board to the display panel.
5. Replace the OPS board.
6. To install the replacement part, follow these steps in reverse order.