Christie Terra Скачать руководство пользователя страница 51

Страница: 51 / 106

Terra Manager

Terra User Manual

020-102838-10 Rev. 1 (05-2020)
Copyright

Audio output modes

None

Audio will not output from the receiver.

2-Channel Analog Audio

If the analog audio input is connected to the transmitter or if the

embedded HDMI audio source connected to the transmitter is 2-

channel, audio will be output to the 3.5 mm analog port.

HDMI Audio Downmix

(default)

If the embedded HDMI audio source connected to the transmitter is

multichannel (up to 8-channels), HDMI audio output from the receiver

is downmixed to 2-channels.

Multichannel HDMI Audio

If the embedded audio source connected to the transmitter is

multichannel (up to 8-channels), embedded HDMI audio output from

the receiver will remain (pass through) as Multichannel.

HDMI downmix and analog

audio

If the embedded HDMI audio source connected to the transmitter is

multichannel (up to 8-channels), output on the embedded HDMI and

the analog on the 3.5 mm analog port will be downmixed to 2-

channels.

HDMI Multichannel and

analog audio

If the embedded HDMI audio source connected to the transmitter is

multichannel (up to 8-channels), the embedded HDMI audio output on

the receiver will remain multichannel, but will also be downmixed and

de-embedded on the 3.5 mm analog output port.

To save changes, click

Save

associated with the receiver(s) or click

Save all

if multiple

receivers are selected.

Configuration Page



RS-232 Subpage (TX and RX)

Use this subpage to modify the RS232 port settings for devices.

Содержание Terra







































































































Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды

Christie Terra, Руководство пользователя

Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды