Getting Started
Spyder X20 User Manual
31
020-000916-01 Rev. 1 (04-2016)
NAME:
Displays the user-defined name for the source.
THUMBNAIL:
Allows user to associate an image file to represent the source within
the Advanced user interface.
ROUTER:
If the source is being patched into Spyder using that is controlled by
Spyder, select the router from the drop down list. The blue links above the router
dropdown allow for additional routers to be added, or existing routers to be edited or
removed.
LAYER / INPUT:
If the router selection is set to ‘<Direct to Layer>’, this control is
used to specify the physical input number that the source is patched to. If a router is
specified, this number specifies the router input providing the source.
PREFERRED TREATMENT:
Optionally, specifies a treatment to automatically be
applied to a layer when the source is selected.
PREFERRED LAYER:
Optionally, specifies a layer to be used when opening the source
in a new layer. If the requested layer is in use when the source is recalled, the first
available layer will be used instead.
Configuring a New Source
A source within Spyder is defined as an input configuration, which stores format specific information such as
connector type and resolution, and an associated router or layer assignment.
TO CONFIGURE A NEW SOURCE:
1.
Make sure the system is physically connected with power to all sources.
Note
: Always double check connections and ensure that each source is on the correct input; and that the source
is powered on and outputting a video signal. This can save a lot of unnecessary troubleshooting.
2.
Right click in the Sources section and select “Add new source”. (see screens
hot below)
Fill out information under the
Properties
section (see screen shot below). Enter the source name, the Input Type
(HD15, DVI, and so on). In the Router section provide a name for the router and the input number for this
source. [If no router is u
sed, use the Router selection combo box to select “Direct to Layer” or select the Remove
link to remove the router].
Figure 14: Configuration Manager
templates
Содержание Spyder X20
