Installing the short pieces of the trim kit on an
array
Learn how to install the short pieces of the trim kit on an array.
1. Mount the display panels on to a fully assembled wall mount that is secured to a mounting
surface.
2. Verify that all display panels in the array are correctly aligned.
3. Pull the display panel away from the wall mount.
4. Using the M4 round-head screws, attach two trim kit brackets to the rear of the panel.
5. Using three M3 round-head screws and two M5 round head screws, loosely secure one of the
short pieces of the trim kit on to a short side of the array.
6. Pushing evenly on each side of the display panel, guide the display panel back into place until
the locking tabs engage.
7. Adjust the trim kit to cover the gap between the panel and the wall.
8. Tighten the trim kit screws.
9. Repeat steps 4 to 8 for the short side of all panels at the edge of the array.
Related documentation
Additional information on the LCD panels is available in the following documents.
•
FHD493-XE User Guide (P/N: 020-001381-XX)
•
FHD493-XE Product Safety Guide (P/N: 020-102681-XX)
•
Extreme Series External Controls Technical Reference (P/N: 020-102499-XX)
Technical support
Technical support for Christie products is available at:
•
North and South America: +1-800-221-8025 or [email protected]
•
Europe, Middle East, and Africa: +44 (0) 1189 778111 or [email protected]
•
Asia Pacific: +65 6877-8737 or [email protected]
Installing the MPL15 wall mount trim kit on 49" LCD display panels
Installing the MPL15 Wall Mount Trim Kit on 49" LCD Display Panels Instruction Sheet
3
020-103048-01 Rev. 1 (02-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
