Installation and Setup
Mirage 4K25 Setup Guide
12
020-101362-02 Rev. 1 (01-2015)
Projector components
ID Item
Description
A
Touch panel controller (TPC)
A touch-sensitive screen used to control and monitor operation. For
information about TPC controls and settings.
B
LED status indicators
LED color and blinking rates (located in both back corners of the projector)
provide information about the status of the projector. For information about
projector states and status, see
Projector LED status indicators
on page
33.
C
Manual douser override
Closing the douser rotates a shutter blade in front of the lamp and reduces
the lamp power to 2.0 kW to conserve lamp life. The override is for
emergency use only.
D
Lamp door and lamps
The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp
types, see the
Mirage 4K25 User Manual (P/N: 020-101361-XX)
.
E
Exhaust duct and vane switch
Extracts heated air from the lamp compartment. The vane switch mounted
inside the rigid port monitors airflow. See
Site requirements
on page 11.
F
Liquid cooling air filter cover
and air filter
Filters air before it circulates to cool the heat exchanger.
G
Shroud (two-piece)
Covers the motorized lens mount assembly.
H
Projection lens
A variety of lenses can be used with the Mirage 4K25. For a list of available
lenses, see the
Mirage 4K25 User Manual (P/N: 020-101361-XX)
.
I
Air filter cover and air filter
Filters the intake air before it circulates through the front compartment to
cool the main electronics.
J
Input panel faceplate
Provides a variety of ports for connecting external devices. For information
about connecting devices and inputs, see
Connect Devices
on page 25.
LAMP SIDE
I
A
B
D
E
F
G
H
J
C
LENS SIDE
B
