Christie M 4K25 RGB, Инструкция по установке и настройке

Страница: 21 / 76

ID Component Description
J Adjustable feet Raise or lower these feet when positioning the projector. Make sure the projector is
level on all sides and the displayed image appears rectangular without any keystone.
Display panel components
Identify the main components of the display panel (also known as the home page).
ID Component Description
A Projector Information Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
B Projector and Component
Controls Indicates the states of the projector and its components.
C Power and Temperature Indicates the light source mode, power mode, and intake
temperature.
D Status Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
E IP Settings Displays the IP address and subnet values.
Provides access to changing the IP settings.
F Test Pattern Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
G Input Displays the signal for the currently selected input.
Provides access to the list of input signals.
Installation and setup
Christie M RGB Series Installation and Setup Guide 21
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.