2 of 6
LX900 Lamp/Filter Replacement Instruction Sheet
020-000029-01 Rev. 1 (01/08)
LAMP REPLACEMENT PROCEDURE
When the projector’s lamp reaches its end of life, the Lamp
Replacement icon
appears on the screen and LAMP 1
REPLACE / LAMP 2 REPLACE indicator illuminates
orange (Figure 1). Replace the lamp with a new one
promptly. The timing when the LAMP REPLACE indicator
should light is dependent on the lamp mode.
NOTE:
The
Lamp replacement icon will not appear when the Display
function is set to “Off” or during “Freeze”.
DANGER
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
•Lamp life will differ from lamp to lamp. The environment in which the lamp is used is also a
factor.
•If the LAMP 1 REPLACE/LAMP 2 REPLACE indicators light up, replace the lamp with a new one
IMMEDIATELY after the projector has cooled down. There is a risk of lamp explosion if the lamp
is used beyond this point.
•Lamp may explode due to vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or
conditions in which the projector and lamp are being used.
Lamp 1 & 2 Indicators
Figure 1 Lamp Indicators
