LX900 Lamp/Filter Replacement Instruction Sheet
1 of 6
020-000029-01 Rev. 1 (01/08)
LX900 Lamp/Filter Replacement
Instruction Sheet
INTRODUCTION
These instructions outline the details for Lamp and Filter replacement in the LX900 projector (Model
No. 103-014101-01). The lamps are located at the rear of the projector and are accessed by lifting the
lamp cover.
KITS REQUIRED
003-120394-01 (Replacement Lamp Type No.: POA-LMP104)
003-002003-01 (Replacement Air Filter)
INSTRUCTIONS
DANGER
Do not drop the lamp assembly or touch a glass bulb! The glass can shatter and may cause injury.
DANGER
Disconnect all power sources to the projector before opening lamp cover.
WARNING
Allow a projector to cool, for at least 45 minutes before you open Lamp Cover. The inside of a
projector can become very hot.
NOTICE
Use only a Christie approved Lamp and Filter Kit for your specific projector model.
