Christie LW401 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 22

Christie LW401 Скачать руководство пользователя страница 14

13

ENGLISH

Setup Guide

020-000504-02 Rev. 1 (06-2012)

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Turning off the power

1.

Press the

STANDBY/ON

button on the

projector or the

STANDBY

button on

the remote control.
The message “Power off?” will appear
on the screen for about 5 seconds.

2.

Press the

STANDBY/ON

or

STANDBY

button again while the message

appears.
The projector lamp will go off, and the

POWER

indicator will begin blinking in

orange. Then the

POWER

indicator will

stop blinking and light in steady orange
when the lamp cooling is complete.

3.

Attach the lens cover, after the

POWER

indicator turns to steady orange.

Do not turn the projector on for about 10 minutes or more after turning it off.

Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.

WARNING

►Do not touch around the lamp cover and the exhaust vents

during use or just after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.

NOTE

• Please power off the projector after any connected devices are

powered off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, please see

User Manual

- Operating Guide

.

POWER

indicator

STANDBY

button

STANDBY/ON

button

http://www.pureglare.com.au

«
...
12
13
14
15
16
...
»

Содержание LW401























Отзывы:

Нет отзывов