Christie FHQ841-T, Руководство пользователя

Страница: 17 / 46

FHQ841-T LCD Panels User Manual 17
020-000735-01 Rev. 1 (06-2014)
Installation
Remote Control
To install batteries in the remote control:
1. Press down the tab on the cover and pull the cover up.
2. Insert the included batteries (CR2025 3V).
3. Insert the lower tab of the cover into the opening, and press down the cover until it clicks in
place.
Notes on Batteries
• Make sure that the battery polarities are correct when installing the batteries.
• If the remote control will not be used for an extended period, to avoid damage from leakage
remove the batteries.
• Do not expose batteries to excessive heat.
Notes on Remote Control Operation
• Make sure that there is nothing obstructing the infrared beam between the remote control and
the IR receiver on the display.
• If the effective range of the remote control decreases, or it stops working, replace the batteries
with new ones.
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Ambient conditions may possibly impede the operation of the remote control. 
If this happens, point the remote control at the display, and repeat the operation.
Quick Setup
Here is a quick overview of the display installation process. The sections following this one provide
detailed instructions.
Installation must be performed by a qualified custom video installation specialist.
Step Procedure For Details...
1 Mount the display(s) on a wall (optional) See Mounting the
Display on page 19.