FHD552-X LCD Panel Service Manual
8
020-000757-01 Rev. 1 (09-2014)
Replacement Procedures
Always turn off and disconnect or disengage all power sources to the panel before servicing or
cleaning. Follow all service safety guidelines. When reinstalling a module, follow the removal
instructions in reverse unless otherwise indicated. Make sure the panel is disconnected from AC
power before you start repairing, removing, or installing any modules. This panel is internationally
approved and is designed for safe and reliable operation. To assure complete safety at all times it is
imperative the following precautions be taken during servicing and the original design remain
intact.
Tools Required
• Phillips™ screwdrivers: #2 and #3
• 3/16 Hex Driver
• 6 mm Ball Driver
• Side Cutters
• Magnetizer
Always wear gloves and follow proper ESD precautions when handling, servicing, or cleaning
internal projector components.
