Christie FHD552-X, Руководство пользователя, Страница: 43 / 70

Operation
FHD552-X LCD Panel User Manual 43
020-000741-01 Rev. 1 (07-2014)
VGA ADC Settings
Select VGA ADC Settings from the Advanced Settings menu to calibrate the display’s analog-to-
digital converter (ADC) for VGA sources.
Flesh Tone
Select Flesh Tone from the Advanced Settings menu to lighten or darken the flesh-colored areas of
the image. (This setting is only available with Video sources.)
IRFM
Select IRFM from the Advanced Settings menu and press or to enable or disable this feature,
which creates slight frame motion to help avoid image retention.
Baud Rate
Select Baud Rate from the Advanced Settings menu and press or to set the data rate of the
RS232 communication link.
Smart Light Control
Select ON to enable the dimming feature of the display. Local dimming improves the black level and
contrast of the display by adjusting the backlight to match the image, but is not ideal for all
content.
Wake Up From Sleep
Select Wake Up From Sleep from the Advanced Settings menu and press or to control this
feature, which operates as follows:
• VGA Only: The display wakes up from power-saving mode when it receives an active video
signal on its VGA (analog) input.
• VGA, Digital, RS232: The display wakes up when it receives an active signal from its VGA,
HDMI, Display Port or DVI inputs, or receives a valid RS232 command.
• Never Sleep: The display never enters power-saving mode.
Temperature & Fan Status
Select Temperature & Fan Status from the Advanced Settings menu and press or to display
information about the health of the display: the internal operating temperature and the cooling fan
speeds.
Multi-Display Control
Select Multi-Display Control from the Advanced Settings menu and press to configure your video
wall. This sub-menu provides the following controls:
• Monitor ID: This control lets you manually set the Monitor ID of each display in the video wall.