manualshive.com logo in svg

Christie FHD462-X, Руководство пользователя

Поделиться
Скачать
Christie FHD462-X Скачать руководство пользователя страница 43

   Operation

FHD462-X LCD Panel User Manual

43

020-000769-02 Rev. 1 (01-2016)

Ethernet Setup

Select Ethernet Setup from the Advanced Settings menu and press   to configure network settings.

• Enable Network: Enables the network feature.

Options: No, Yes.

• Dynamic IP: Enables DHCP for dynamic IP address assignment.

Options: Disable, Enable.

• Static IP Address: Sets the static IP address when the DYNAMIC IP line is disabled

 

or views it 

when the DYNAMIC IP line is enabled.

Range: 255.255.255.255 (0.0.0.0)

• Subnet Mask: Sets the subnet mask when the DYNAMIC IP line is disabled

 

or views it when 

the DYNAMIC IP line is enabled.

Range: 255.255.255.255 (0.0.0.0)

• Gateway: Sets the gateway address when the DYNAMIC IP line is disabled

 

or views it when the 

DYNAMIC IP line is enabled.

Range: 255.255.255.255 (0.0.0.0)

• DNS Address: Sets the DNS address when the DYNAMIC IP line is disabled

 

or views it when 

the DYNAMIC IP line is enabled.

Range: 255.255.255.255 (0.0.0.0)

• Save Network Settings: Saves the network configuration when the DYNAMIC IP line is 

disabled.

Options: No, Yes.

• Email Alert: You can enable/disable the following email alerts.

- Power Status Alert: sent when the unit is turned on or off.

- Source Status Alert: sent when a different source is selected.

- Signal Lost Alert: sent when the input sync is lost. 

• Load Default Settings: Loads default network settings.

Options: No, Yes.

• Refresh: Refreshes the configuration of Static IP Address, Subnet Mask, Gateway and DNS 

Address. 

• Device MAC: Shows the unique address assigned to network interfaces.

Factory Reset

To reset ALL display settings (including image settings) back to their factory defaults, choose Select 
Ethernet Setup from the Advanced Settings menu and press to configure network settings. from the 
Advanced Settings menu. 

Caution! Failure to comply with the following could result in minor or moderate injury.

• This action is not reversible. Proceed with caution! 

Содержание FHD462-X








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды