1. On the RS232 Command screen, under Send Command, select ASCII Command.
2. To select a command type, select Read or Write.
3. To select a command destination, from the Monitor ID list, select a display panel.
4. If you are entering a Read command, do one of the following.
•
To manually enter a valid three-character command from the Serial Command List (on
page 6), in the 3 Char CMD field, type a command.
•
To choose a three-character command from a list of commands, click 3 Char CMD. When
you hover your mouse pointer over a command, a brief description of the command and
an example in hexadecimal format appear at the bottom of the window. Click a command
to select it.
5. If you are entering a Write command, do one of the following.
•
To enter a decimal parameter value to send with the command, in the Value (Dec.) field,
enter a value.
•
To change the parameter entry mode to Value (Hex) and enter a hexadecimal value, click
Value (Dec.).
6. Click Send.
If the command is successfully executed, the command and the response from the target
display panel appear in the window.
Using the Video Wall Toolbox application
Extreme Series LCD Panels Technical Reference–External Controls
19
020-102499-04 Rev. 1 (11-2017)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Содержание Extreme Series
Страница 1: ...Technical Reference 020 102499 04 Extreme Series LCD Panels External Controls ...
Страница 25: ......
