Christie E510 LED Display Controller User Guide
14
020-001941-01 Rev. 1 (07-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Perform these tasks when configuring the array.
To configure the array, the computer running the Christie E510 LED Display Controller software must be connected to
the controller with a USB A to B cable.
1.
Install the Christie E510 LED Display Controller software (on page 14).
2.
Set the input resolution (on page 14).
3.
Review the screen connections (on page 15).
4.
Adjust the initial picture coordinates (on page 16).
5.
Adjust the screen brightness (on page 17).
6.
Adjust the image quality (on page 17).
7.
Set the redundancy backup (on page 17).
8.
Test the communication between the controller and the tiles (on page 18).
9.
Review and modify the tile configuration (on page 18).
The Christie E510 LED Display Controller software controls the configuration of the array.
1.
Disable the firewall.
2.
Insert the Christie E510 LED Display Controller software USB flash drive into the computer.
3.
Follow the on-screen instructions and install the Christie E510 LED Display Controller software.
To access the configuration features of the controller software, log into the system.
1.
Ensure the computer running the controller software is on the same network at the controller.
2.
Connect a USB cable between the controller and the computer running the Christie E510 LED Display
Controller software.
3.
Launch the Christie E510 LED Display Controller software and log in as the administrator.
a.
Click User > Advanced User Login.
b.
Login with the password admin.
Set the resolution for the home page display of interface, which must be consistent with the output resolution of the
video source.
1.
Log into the Christie E510 LED Display Controller software.
Содержание E510
Страница 1: ...Christie E510 LED Display Controller User Guide 020 001941 01 ...
Страница 41: ......