Lamp Replacement Instructions
013-100357-02 (Rev. 1)
3 of 5 Pages
STEP 4 - REMOVE THE LAMP MODULE
(a)
Unscrew the three mounting screws securing the lamp module. Refer to Figure 2.
(b)
Release the handle. Refer to Figure 2.
(c)
Remove the lamp module from the projector housing. Refer to Figure 2.
STEP 5 — INSERT NEW LAMP MODULE
(a)
Use the designated guide pins to insert the new lamp module. Refer to Figure 3.
(b)
Firmly screw-in the three mounting screws to secure the lamp module. Do not use
excess force. Refer to Figure 3.
(c)
Secure the handle. Refer to Figure 3.
Figure 2. Remove Lamp Module
Figure 3. Insert New Lamp Module
