Christie DPS Series, Инструкция по безопасности продукта

Страница: 3 / 12

Important Safety Information
DPS Series Product Safety Guide
3
020-001970-01 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Hot surface hazard. To avoid personal injury,
allow the product to cool for the recommended
cool down time before performing maintenance
or service.
Burn hazard. To avoid personal injury, allow the
product to cool for the recommended cool down
time before performing maintenance or service.
Explosive material hazard. To avoid personal
injury, disconnect all power sources before
performing maintenance or service, and wear
Christie-approved protective clothing.
Bright light hazard. To avoid personal injury, do
not look directly at the light source.
Pinch hazard. To avoid personal injury, keep
hands clear and loose clothing tied back.
Fan hazard. To avoid personal injury, keep
hands clear and loose clothing tied back.
Disconnect all power sources before performing
maintenance or service.
Electrostatic sensitive device hazard. To prevent
damage to electronic components by static
electricity, wear an anti-static wrist strap and
follow anti-static protocols.
Laser LED radiation hazard. To avoid personal
injury, avoid eye or skin exposure to direct or
scattered radiation.
Mandatory action
Consult the user manual.
Consult the service manual.
Unplug before opening.
Wear a full face shield.
Electrical labels
In the European Union:
EU-wide legislation as implemented in each
Member State requires that used electrical and
electronic products carrying the mark (left)
must be disposed of separately from normal
household waste. This includes projectors and
their electrical accessories. When disposing of
these products, follow the guidance of your
local authority and/or consult the shop where
you purchased the product.
The used products are reused and recycled in
a proper way after they are collected. This
effort helps to reduce waste as well as
negative impacts on human health and the
environment at the minimum.
The mark on the electrical and electronic
products only applies to the current European
Union Member States.
Outside the European Union:
To dispose of used electrical and electronic
products outside the European Union, contact
your local authority for correct methods of
disposal.
For EU:
The crossed-out wheeled bin indicates used
batteries should not be put in general
household waste. A separate collection system
is used for batteries to allow proper treatment
and recycling in accordance with legislation.
Laser labels
Indicates a laser window.
Indicates a lser radiation hazard.
Avoid direct eye exposure
Indicates an electric shock
hazard. Do not open the case or
allow non-user operation in the
area.
No direct exposure to the beam
is permitted according to RG3
IEC/EN 62471-5:2015 FIRST
EDITION.
Operators must control access to
the beam within the hazard
distance and install the product
at a height that prevent
sexposure of spectators' eyes
within the hazard distance.