Christie D4K25, Руководство по обслуживанию

Страница: 95 / 138

D4K25 Service Manual 7-1
020-100880-01 Rev. 1 (06-2012)
7 Serial API
This section provides a list of serial API commands that you can run to modify projector settings.
7.1 Function Codes
AUTOMATIC SCAN TYPE DETECTION (ASD)
Set the Automatic Scan Type Detection ON or OFF for the current channel.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with channel number. Valid range is 101 - 164.
NONE
Select use Automatic Scan Type Detection for the current channel.
EXAMPLES:
(ASD?)
Get the current status of Automatic Scan Type Detection on the current active channel.
(ASD+C108?) Get the current status of Automatic Scan Type Detection on the provided channel.
(ASD+C108 1) Use Automatic Scan Type Detection on channel 108.
(ASD+C108 0) Do not use Automatic Scan Type Detection on channel 108.
BAUD RATE (BDR)
Set the baud rate for a serial communications port.
SUBCODE DESCRIPTION OF USE
PRTA
Set the baud rate on port A. Rates can be 1200, 2400, 9600, 19200, 38400, 57600, or 115200.
EXAMPLES:
(BDR+PRTA6) Set baud rate on port A to 115200 bits per second
(BDR+PRTA?) Get baud rate (BDR+PRTA!006 ”115200)
CHANNEL (CHA)
Select Channel configuration to use. Channel range is 101 to 164. Channel configuration sets the input routing and image pro-
cessing options for input signals.
SUBCODE DESCRIPTION OF USE
NONE Select Channel. Valid range 101 - 164
EXAMPLES:
(CHA?) Get current active channel
(CHA 108) Set channel 108 as active channel