Christie D16HD-HS, Руководство пользователя

Страница: 45 / 72

Configuring system settings
HS Series D16-20 User Manual 45
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Aligning the image with zoom and focus
Ensure that the image reflected from the digital micromirror device (DMD) is parallel and centered
with the lens and screen.
1. Display an image or test pattern that can be used to analyze image focus and geometry.
2. Select Zoom on keypad or remote control.
3. You can also select Menu > Configuration > Lens Settings > Zoom.
4. Use the up and down arrow keys to zoom in or out of the image.
5. To exit the menu, press EXIT.
6. Select Focus on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Focus.
7. Use the up and down arrow keys to adjust the focus of the image.
8. To exit the menu, press EXIT.
9. To refine your adjusts, repeat steps 2 to 7.
Adjusting lens position
Shift the lens to the specific position.
1. Display an image or test pattern that can be used to analyze image location.
2. Press LENS on keypad or LENS H/LENS V on remote control.
3. You can also select Menu > Configuration > Lens Settings > Lens Shift.
4. Use the arrow keys to adjust the lens position.
5. To exit the menu, press EXIT.
Saving lens setting
Save the lens position, zoom and focus. One projector can save maximum up to five lens settings.
1. Select Menu > Configuration > Lens Settings > Lens Memory > Save Current Settings.
2. To save the lens setting, select an empty record.
3. To confirm the selection, press ENTER.
Applying lens setting
Apply the previously saved lens setting to the projector.
1. Before applying the previous lens setting, you need to save the lens setting.
See Saving lens setting on page 45 for further details.
2. Select Menu > Configuration > Lens Settings > Lens Memory > Apply Position.
3. To apply specific lens setting, select the required record.