Christie CP2315-RGB, Инструкция по установке и настройке

Страница: 23 / 47

Installing the touch panel
The touch panel controls projector functions and provides quick access to projector information.
The touch panel is mounted on the rear cover of the projector.
1. Remove the touch panel and the mounting arm from their packaging.
2. Attach one end of the touch panel mounting arm over the ball joint on the rear of the touch
panel.
A Mounting arm
B Ball joint
3. While supporting the touch panel, fit the other end of the touch panel mounting arm over the
ball joint on the rear panel or electronics side of the projector.
Installing and setting up
CP2315-RGB Installation and Setup Guide 23
020-102772-02 Rev. 1 (05-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.