Christie CP2230, Руководство по обслуживанию

Страница: 98 / 150

5-38 CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
Section 5: Parts and Module Replacement
5.13.5 Lamp Replacement
Lamp replacement must be performed by a Christie authorized service technician.
EXPLOSION HAZARD! Wear authorized protective clothing whenever the lamp door is
open and when handling the lamp. Never twist or bend the quartz lamp body. Use the correct
wattage lamp supplied by Christie. Ensure those within the vicinity of the projector are also
wearing protective safety gear.
(Special protective clothing is available from Christie – P/N: 598900-095)
Never attempt to remove the lamp when it is hot. The lamp is under a great deal of
pressure when hot and may explode, causing personal injury or death and/or property
damage. Allow lamp to cool completely before handling.
(Estimated Replacement Time: 10 m 5 minute LampLOC
™
Alignment)
1. Wearing authorized protective safety gear, unlock and open the lamp door.
2. Remove the lamp:
a. Remove the cathode lamp duct via the three clips. ( Figure 5-55 )
Figure 5-55 Front Lamp Duct