Christie CCM-LX, Руководство пользователя, Страница: 46 / 128

44
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Chapter 3 Basic Setting and Operation
"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into
Standby in proper user operation" signifies that the projector is turned on by using the web browser
and then it is turned into standby with ON/STANDBY button on the top control or the remote control.
Up to 99,999 hours can be set for the time setting.
If condition "When Auto Play is failed" is checked, the trap is sent when occurring the error during the
auto display operation using with the network viewer function. (
p.98) For further information of the
error, refer to item "Auto Display setting and control page [3]". ( p.101)
Trap option
Trap option setting
Tick check boxes in front of the condition item to send the
trap.
Click
Set
button if you tick or un-tick the check box on a page.
[1]––––––––––––––––––––––––––––––––––
O
When PJ lamp is off.
O
When PJ lamp replacement time is reached.
O
When PJ needs service.
O
When internal PJ temperature is too high.
O
When PJ is turned into Standby in proper user opera-
tion.
[2]––––––––––––––––––––––––––––––––––
O
When Power management function turns PJ lamp
off.
O
When Shutter management function turns PJ
lamp off.
O
When the signal is interrupted.
O
When Auto Play is failed.
[3]––––––––––––––––––––––––––––––––––
O
When accumulated filter use time
reaches [ ] hours.
O
Filter Warning.
[4]––––––––––––––––––––––––––––––––––
O
When lamp Corres. Value reaches
[ ] hours.
Downloaded from ProjectorsManual.com Manuals