Christie CC50-2301, Руководство по установке

Страница: 22 / 56

2-12 CC50-2301/CC67-3001/CC72-3301 Installation Manual
020-100248-03 Rev. 1
Section 2: Installation and Setup
2.2.6 Step 6 - Apply Permanent External Support
External support for a display wall must be designed and implemented by a qualified
installer and must comply to local area safety standards. All display walls must have permanent external
supports.
A CC50/CC67/CC72 display wall requires external support regardless of its overall height. Reinforcing the
structure prevents the wall from tipping due to unforeseen circumstances, such as earthquakes.
When designing external support for a display wall consider:
• Local building codes for specific requirements.
• Size of the installation (number of display cubes being stacked).
• Physical characteristics of the cube installation (including weight, center of gravity, mounting hole location).
See Appendix A: Display and Pedestal Dimensions for technical information on display wall components.
• Type of material being considered for external support.
• Strength and stability of the vertical or horizontal surface.
• Required number of external supports.
Examples of External Supports
Figure 2-12 illustrates two possible external support methods for a display wall. Consider your options and
choose the method that best supports your specific installation. For illustrative purposes, the cubes in
Figure 2-12 are shown with the screens installed. In a typical installation, the screens are not installed until the
display wall is mounted to an external support. For information on screen installation, see 2.2.7 Step 7 -
Install Display Screens, on page 2-13 .
Figure 2-12 Examples of External Support