EDO–EDID Override
Configures which EDID is presented using inputs that support EDIDs (such as DisplayPort, HDMI, DVI,
and so on).
Use this command to configure what Boxer 4K advertises regarding the type of signals it accepts. This
command does not need to be set to accept a particular type of signal.
Commands
Command
Description
Values
EDO <rate>
Defines the expected frame rate regardless of the
active window size of the signal. This command is
only available if video electronics are on. (Saved
value)
24
25
30
48
50
60 (Default)
EDO+COLM <value> Defines the expected active window size of the
incoming signal. This command is only available if
video electronics are on. (Saved value)
0 = Auto Detect (Default)
1 = 4K—Columns 2x1
2 = 4K—Columns 4x1
3 = 4K - Quadrants 2x2
EME–Enable Asynchronous Serial Messages
Enables or disables the asynchronous serial messages that the projector occasionally transmits.
Commands
Command
Description
Values
EME <0 | 1>
Enables or disables asynchronous serial
messages. (Saved value)
0 = Disables all asynchronous FYI/ERR
serial messages
1 = Enables asynchronous FYI/ERR serial
messages (Default)
ETP–Engine Test Pattern
Enables or disables the engine diagnostic test patterns.
Commands
Command
Description
Values
ETP <index>
Enables the engine diagnostic
test patterns, indicated by the
<index> parameter. This
0 = Flat Black
1 = Green
Serial API commands
Boxer 4K Serial API Commands Technical Reference
23
020-101697-05 Rev. 1 (07-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
