manualshive.com logo in svg

Christie AirScan, Руководство пользователя, Страница: 7 / 7

Поделиться
Скачать
Christie AirScan Скачать руководство пользователя страница 7

7

1.1 07/2018 

020-001485-01

Connectors

M16 plug / 
Connector4

This is the power plug. Connect the supplied power cable with the 14-pin M16 
connector to the AirScan and the XLR male connector to the XLR female con-
nector of the low voltage power supply. Then connect its power cord. Note that 
the device powers on automatically and that there is no dedicated power switch.

Ethernet status indicator (above connectors)

Left, red LED 1

Ethernet system ready

Middle, red LED 2 Ethernet connection present
Right, red LED 3

Ethernet data transmission active

General device status indicator (on top of device)

Leftmost, 
yellow LED 1

- slowly (1Hz) flashing: internal warning message (e.g. due to soiled sensor cover)
- faster (4Hz) flashing: internal error message

- continuous light: for internal use

Green LED 2

Detection field up to 30m is free

Red LED 3

Detection field up to 30m is occupied

Yellow LED 4

Detection field over 30m is occupied

Rightmost, 
green LED 5

Sensor functions active

Содержание AirScan








Отзывы:

Нет отзывов