ASH–Auto Shutdown
Moves the projector to Standby mode if it is in search mode and cannot detect an active signal within
a set period.
Commands
Command
Description
Values
ASH <value>
Enables or disables auto
shutdown.
0 = Turns off auto shutdown (Default)
1 = Activates auto shutdown after five minutes
2 = Activates auto shutdown after 10 minutes
3 = Activates auto shutdown after 15 minutes
4 = Activates auto shutdown after 20 minutes
5 = Activates auto shutdown after 25 minutes
6 = Activates auto shutdown after 30 minutes
Examples
Turn off auto shutdown:
(ASH 0)
Activate auto shutdown after ten minutes:
(ASH 2)
BDR–Baud Rate
Sets the baud rate for a serial communications port.
Commands
Command
Description
Values
BDR+PRTA <value>
Sets the baud rate for the RS232-IN port.
0 = 2400
1 = 4800
2 = 9600
3 = 14400
4 = 19200
5 = 38400
6 = 57600
7 = 115200 (Default)
8 = 1200
BDR+PRTB <value>
Sets the baud rate for the RS232-OUT port.
BDR+PRTC <value>
Sets the baud rate for the RS422 port.
Serial API commands
GS Series 599 Serial Commands Technical Reference
12
020-102403-02 Rev. 1 (04-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.