Touch-it Monitor
Operating Instructions
Christ Elektronik GmbH
10
/
20
www.christ-elektronik.de
Tel.: +49 8331 8371-0
3
Software
3.1
Video Signal
Adjust the VGA Video Signal
To adjust the best suited values press the AUTO button on the rear of the Touch Monitor.
Choose the right input signal
If the VGA and DVI connector is plugged into the Touch Monitor you have
to choose the input Signal.
Press the MENU button on the rear of the Touch Monitor to open the OSD
menu.
Select with “+” and “-“ the tab Setting and press MENU.
Select Input and choose your desired video signal.
With “AUTO” you can close the OSD menu.
