manualshive.com logo in svg

Chris-Craft 2014 32 Corsair RK, Руководство пользователя

Поделиться
Скачать
Chris-Craft 2014 32 Corsair RK Скачать руководство пользователя страница 166

Appendix A 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not 

apply to you. Chris-Craft’s obligation with respect to this warranty is limited to making repairs to or replacing 

the defective parts and no claim for breach of warranty shall be cause for cancellation or rescission of the 

contract or sale for any boat manufactured by Chris-Craft. 

Chris-Craft will discharge its obligations under this warranty as rapidly as possible, but cannot guarantee any 

specific completion date due to the different nature of claims which may be made and services which may be 

required. Chris-Craft reserves the right to change or improve the design of its boats without obligation to mod-

ify any boat previously manufactured. This limited warranty gives you specific legal rights, and you may also 

have other rights which may vary from state to state. Chris-Craft shall in no way be responsible for any re-

pairs not PRE-AUTHORIZED by a Chris-Craft Customer Service Manager or repairs performed by a repair 

shop not PRE-AUTHORIZED by a Chris-Craft Customer Service Manager. 

 

ARBITRATION OF DISPUTES AND WAIVER OF JURY TRIAL 

                                                                                                                                                                                                   

EXCEPT AS SPECIFICALLY EXCLUDED IN THIS LIMITED WARRANTY, PURCHASER, CHRIS-CRAFT 
AND DEALER AGREE TO SUBMIT ANY AND ALL CONTROVERSIES, CLAIMS OR DISPUTES ARISING 
OUT OF OR RELATING TO THE BOAT AND THIS LIMITED WARRANTY AND ALL OTHER AGREEMENTS 
EXECUTED BY PURCHASER RELATED TO THE BOAT 

TO BINDING ARBITRATION

. IT IS THE EX-

PRESS INTENT OF PURCHASER, CHRIS-CRAFT AND DEALER THAT THIS ARBITRATION PROVISION 
APPLIES TO ALL DISPUTES, INCLUDING CONTRACT DISPUTES, TORT CLAIMS, FRAUD CLAIMS AND 
FRAUD-IN-THE-INDUCEMENT CLAIMS, STATUTORY CLAIMS AND REGULATORY CLAIMS RELATING 
IN ANY MANNER TO THE BOAT AND THIS LIMITED WARRANTY. IF ANY CONTROVERSY OR CLAIM 
DESCRIBED IN THIS ARBITRATION PROVISION IS DETERMINED FOR ANY REASON TO BE INELIGI-
BLE FOR ARBITRATION, AND FOR ANY CONTROVERSIES, CLAIMS, OR DISPUTES SPECIFICALLY 
EXEMPTED FROM ARBITRATION, THEN THOSE CONTROVERSIES, CLAIMS OR DISPUTES SHALL 
INSTEAD BE DECIDED BY A JUDGE OF A COURT OF COMPETENT JURISDICTION, IN MANATEE 
COUNTY, FLORIDA, 

WITHOUT A JURY

. PURCHASER, CHRIS-CRAFT AND DEALER KNOWINGLY AND 

VOLUNTARILY WAIVE THE RIGHT TO A TRIAL BY JURY FOR ALL SUCH CONTROVERSIES, CLAIMS 
AND DISPUTES. PURCHASER, CHRIS-CRAFT AND DEALER UNDERSTAND THAT THERE SHALL BE 
NO JURY TRIAL, WHETHER THE CONTROVERSY OR CLAIM IS DECIDED BY ARBITRATION OR BY 
TRIAL BEFORE A JUDGE. NOTWITHSTANDING THE PROVISIONS OF THIS ARBITRATION AGREE-
MENT, WITH REGARD TO CONTROVERSIES AND/OR ENTITLEMENT TO POSSESSION OF EITHER 
THE BOAT OR ANY TRADE-IN, ANY PARTY HERETO MAY RESORT TO A JUDICIAL DETERMINATION 
(BY A JUDGE AND NOT A JURY), OF SUCH CONTROVERSIES, DISPUTES OR CLAIMS WITHOUT 
WAIVING ANY RIGHT TO DEMAND ARBITRATION WITH RESPECT TO ALL OTHER CONTROVERSIES, 
DISPUTES OR CLAIMS BETWEEN THE PARTIES AS MORE SPECIFICALLY SET FORTH IN THIS ARBI-
TRATION PROVISION. 
ALL ARBITRATIONS SHALL PROCEED THROUGH THE AMERICAN ARBITRATION ASSOCIATION AND 
BE SUBJECT TO ITS COMMERCIAL ARBITRATION RULES, EXCEPT AS SET FORTH HEREIN. THE AR-
BITRATORS SHALL HAVE THE AUTHORITY TO AWARD ANY FORM OF RELIEF THAT COULD BE 
PROPERLY AWARDED IN A CIVIL ACTION IN THE STATE OF FLORIDA FOR THE TYPE OF CLAIMS 
PRESENTED, SUBJECT HOWEVER, TO ALL LIMITATIONS, PREDICATES, AND CONDITION COVERING 
SUCH REMEDIES OR RELIEF  UNDER FLORIDA LAW.  
 

A-6 

A-6 

Содержание 2014 32 Corsair RK











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды