3
1. General Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury. Keep this manual readily
accessible for reference.
■
Working area safety
- Keep working area clean and well lit.
- Do not operate power tools in the presence of flammable liquids, gases or dust.
- Keep the power tool away from children.
■
Electrical safety
To avoid risk of electric shock:
-
Never modify the plug in any way.
-
Do not expose the power tool to wet conditions.
-
Do not pull or damage the power cord.
-
Use suitable extension cord when operating outdoor.
-
Use a residual current device (RCD) when operating in a damp location.
■
Personal safety
To avoid injury during operation:
-
Do not use the power tool when under influence of drugs, alcohol or medication.
-
Ensure that the switch is in OFF/Neutral position before connecting the power source.
- Keep proper footing and balance at all time.
- Do not wear loose cloth or jewelry. Keep hair, clothing and gloves away from moving parts.
2. Care/Maintenance
-
Use the appropriate power tool for the application. Do not force the power tool.
- Do not use the power tool if the switch is malfunctioning.
- Disconnect the power source before making adjustments, changing accessories or storing the tool.
- Keep the tool away from children or untrained personnel.
- Periodically check for any misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the operation.
- Keep the screw bits clean before and after use.
- Only use compatible power supplies and accessories.
3. Read Before Use
-
Use the correct voltage: Carefully check the voltage shown on the power supply and this manual. Only plug
the unit into a power source of the correct voltage.
-
Determine the appropriate torque range: choose the correct screwdriver for the appropriate torque. Avoid
long-term usage under high torque setting to extend the product life. (The recommended torque value is
between scales 1-8 on the engraving ring.)
-
Check the driver condition: If the power cord is damaged, it should be immediately unplugged and replaced
to avoid electric shocks or short circuit.
-
Ensure proper working environment: do not use in high temperature, high humidity environments or near
flammable materials.
-
When plugging in or unplugging the power cord, hold the plug firmly. Never pull on the cord.
-
Hold power tool by its insulated gripping surface.
- Make sure the work piece isn’t conducting any form of electricity before operation.