Installation
5
Switch Adjustment
The Hopper Level Switch is pre-adjusted at the
factory to a delay of "90" seconds. The delay may be
changed for a specific installation.
Use the included Small Screw Driver included to
adjust the switch.
Time Delay Adjustment
•For Less Time: Turn the
Time
Delay
Adjustment Screw
counter-clockwise
(light blinks faster).
•For More Time: Turn the
Time
Delay
Adjustment Screw
clockwise. (light
blinks slower)
Hog Application
In most Hog installations, The Hopper Level Control is located in the Feeder at the end of the Fill System.
Installation is very similar to the Poultry application. Attach the Hopper Level Switch similarly to the Poultry
application shown in
“Switch assembly/Installation” on page 3.
Safety Timer
Adjustment Screw
Time Delay
Adjustment Screw
Figure 4.Switch Adjustment
Proximity Sensor
Figure 5.Switch Adjustment
Install Hopper Level Switch in last Feeder.