Introduction
The 56284 Hopper Level Switch is designed for use with any feeding system that carries free flowing feed.
The Switch automatically starts and stops the fill system as feed level changes in relationship to the Switch
Sensor.
Follow Safety Instructions
Carefully read all safety messages in this manual and on your equipment safety signs.
Follow recommended precautions and safe operating practices.
DANGER: Moving Parts
Disconnect electrical power before working on system, equipment may start
automatically. Otherwise personal injury will result.
Severe personal injury will result if the equipment is operated without covers
properly installed.
DANGER: Electrical Hazard
Disconnect electrical power before inspecting or servicing equipment unless maintenance
instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in accordance with local and national
electric codes.
Ground all non-current carrying metal parts to guard against electrical shock.
Electrical disconnects and over current protection are not supplied with the equipment.
Contact your nearby Chore-Time distributor or representative for additional parts and information.
Chore-Time Group, A division of CTB, Inc.
PO Box 2000
Milford, Indiana 46542-2000 USA
Phone (574) 658-4101 Fax (877) 730-8825
Email: [email protected]
Internet: www.choretime.com
MF2486A
November 2019
Installation and Operators Manual
Installation and Operators Manual
Hopper Level Switch
Part No. 56284