Installation
Chore-Tronics® 3 Auto Adjust PDS™ 4, 8, & 16 Station
7
Pressure Sensor location
The Pressure Sensor should be installed somewhere in the first half of Drinker Line in the brood area.
Locate the control in a convenient location where it can easily be seen and adjusted.
Fasten the control to the wall through the four holes in the corners (mounting hardware not supplied)
Installation
(56120)
Pressure Sensor
Not more than 1/2 system length
Figure 3.Pressure Sensor Location
Figure 4.Mounting orientation
13-1/2" [33.7 cm]
15-5/8" [39.6 cm]
15
-1
/4" [3
8.7 cm]
22
-5
/1
6"
[5
6.
7
cm
]
30-15/16" [78.6 cm]
Mounting Hole Locations