Model ATF™ End Control with Sensor Plus™
5
MF1630B
Model ATF End Control Update Kit
The Model ATF End Control Update Kit is designed to replace an existing mechanical switch with a Sensor
Plus switch.
1. Disconnect the power at the circuit breaker. Remove and discard the Power Cord (item 6), 90° Romex
Connector (item 1) on the Motor, Motor Wires (item 3), Flex Conduit (item 2), Switch Box (item 4),
and Switch Box Mounting Plate (item 5).
Figure ?. Removing parts that will be replaced
2. Swing the Feeder Pan (item 5) down out of the way and remove the Drop Tube Assembly (item 3),
Feed Level Tube (item 1), and Feed Level Ring (item 2). Remove and discard the Switch Assembly
(item 4).
Figure ?. Removing the Switch Assembly
3. Reassemble following the instructions for the Model ATF End Control with Sensor Plus.
HAZARD
ELECTROCUTION
Do not open this c on-
tro l box u ntil e lectrical
power i s disconnect ed
at circuit breakers.
2527-25
1
2
4
6
3
5
MF1630-12 8/2000
Item
Description
1
90° Romex Connector
2
Flex Conduit
3
Motor Wires
4
Switch Box
5
Switch Box Mounting Plate
6
Power Cord
MF1630-13 8/2000
1
2
3
5
4
Item
Description
1
Feed Level Tube
2
Feed Level Ring
3
Drop Tube Assembly
4
Switch Assembly
5
Feeder Pan