Chord SPM 6000 Mk2, Руководство пользователя

Страница: 3 / 5

REAR PANEL
The rear of the SPM 6000 Mk 2 has two sets of inputs, one set of balanced XLR connections and one set of phono
RCA connectors. You will also notice by looking at the diagram below that the inputs can be connected as either
INVERTING or NON-INVERTING modes. Connecting to either the phono or the XLR on the right hand side will
give an inverted output as is normal with other Chord amplification. However if a non-inverting output is preferred
simply connect to the left hand side. As the SPM 6000 Mk 2 is of mono block construction only one of the inputs
should be used. Where a pair of units is used for stereo operation the user should take care to connect both amplifiers
in the same manner so as not to have an out of phase configuration. The input should be connected last, with the
amplifier switched off.
There are two sets of high current gold plated output terminals, the speaker may be connected to either the left
or the right set of terminals. For Bi-wiring configuration both sets of outputs can be used.